Home › Request a Quote
Request a Quote for Custom Busbars
Send a drawing and the electrical conditions, and we will review the part for manufacturability before quoting. Most enquiries come back with questions first, because a busbar quoted from an incomplete specification is a busbar quoted twice.
What to include
| Item | Why it is needed |
|---|---|
| 2D drawing or 3D model | DWG, DXF, PDF, STEP or IGES. A dimensioned PDF alone is enough to start |
| Continuous current | Sets the cross-section, together with the conditions below |
| Ambient temperature | A rating without an ambient is not a rating |
| Free air or enclosed | An enclosed part derates significantly against the same bar in open air |
| Withstand voltage | Sets the insulation build; the material figure alone does not |
| Areas that must stay bare | Contact pads, holes and weld zones are masked before coating |
| Quantity and target date | Tells us whether the profile runs on existing tooling |
What happens next
The drawing is reviewed for manufacturability first: bend radius against stack thickness, pad size against current, insulation clearance at the cut edges, and whether the mask lines leave room for the fasteners. Where something cannot be built as drawn, the question comes back before the quotation rather than after the first article.
Two numbers usually decide whether a program fits your schedule. On existing tooling a first article takes 3 to 7 working days from drawing approval. A profile that needs a new bending or stamping tool takes 10 to 20, because the tool has to be cut and tried before any part runs. Insulation adds 2 to 4 on either route.
Enquiry form
Prefer to talk first
Call +86 757 2583 7540, or see the full address and business hours for the full address and business hours. Technical questions on a drawing go to Liang Junmei, Technical Manager.